Why Should I Hire A Solar Panel Installer Instead of Installing The System Myself
Even though most modern home solar power systems are designed to be easy to install for the average homeowner, there are quite a few good reasons to hire a professional solar panel installer to mount your system. Most of these solar panel installers have years of experience with this type of equipment and can do the job more professionally and in less time than if you attempted it yourself.
DIY Installation Isn't Always Cheap
Most homeowners think that they can lower the cost of their home solar power system if they do the installation themselves. With simpler and smaller installations this may be true. In most other cases a seasoned solar installer can actually save you money by providing all the mounting gear you'll need as part of their installation price. Because they do a large number of these installations each month, they are buying these supplies in bulk and purchase them at a far lower cost than you can find individually. If you contract with a solar installer, they may pass these savings along to you as part of the installation cost and can save you the time and money of trying to find these mounting supplies on your own. They will also stay current with newer mounting equipment and techniques which will help ensure that your solar power system will stay secure and last as long as possible on your home.
Avoiding Damaging Your Home
Another consideration in favor of using a professional solar panel installer is the possibility of damaging your home or your new equipment while installing the system yourself. Most of these modern solar panels are very fragile and a small bump or drop can severely damage a panel. If you cause this damage while installing the equipment yourself, your warranty may not cover the panel and you will have to replace it yourself. A professional solar panel installer will have the experience to avoid this type of accident and will also have insurance in place for those times when accidents do happen. All of this will provide the peace of mind of knowing your system is installed safely and securely on your home.
You Are Eligible for Rebates and other Incentives
Many homeowners are entitled to solar rebates and incentives for installing these alternative energy solutions on their home. Many of these rebates stipulate that the equipment has to be installed by an experienced and licensed solar installer for the homeowner to receive the rebate. If you choose to install your system on your own, you may save a little money, but will also miss the opportunity for any rebates that require a professional solar install. To qualify for the rebate you'll typically need to list the name of the approved solar installer and will also receive a final invoice from them for the work they have completed. A copy of this invoice will usually be required as part of the paperwork you submit to the rebate program.
Ensuring Your System Is Up to Code
Finally, all solar power systems need to eventually be connected to your home's solar panel system to allow you to take advantage of the free power they provide. Even though you have the right to make this connection yourself, it still has to pass a local electrical inspection before you can use the system. This connection may be something that you'd rather have a professional solar panel installer handle as the voltages involved can be dangerous. There may also be specialized connection terminals and wiring required that you may not have available to you. Having a professional solar installer make this connection will ensure that it is done according to code and won't present any shock or fire hazard to you or your family.
|
Sheet metal NOISE!!?
My grandpa is a heater/ac installer and i got a piece of sheetmetal out for him, and i shook it, and it made the best noise ive almost ever heard, laugh out loud, what causes this noise???
Get the answers
|
|
Can a recess can light cause moisture in an ac duct by condensation from heat?
These can lights are sealed and use an airtight trim. They are made to have insulation blown or laid directly on top of them, so they don't get that hot.
I have them pushed up against an ac duct, not enough to block the air flow, but definitely touching. The ac installer says this can cause mildew in the duct because of condensation. I have never heard of this being a problem. I really don't want to move these cans, as this is a large project. Is the ac installer right?
Get the answers
|
|
Any professional AC installers willing to uninstall 2 units and install 2 units on personal time?
I have 2 older units from 1984. They are R22. I have purchased 2 preowned units that are 410a. I need the old units taken out, the new units installed, and possible new copper lines? I am not sure with having r22 before and switching to 410a.. if I will need to switch the lines? Does anyone know? I am in Deltona, FL. Thank you!!
Get the answers
|
|
Why doesn't my AC cool to the set point?
We have a brand new 15 seer 3 ton unit in Phoenix , temp was 108 today. The cooling thermostat is set to 78 but the room temp does below 80. The dealer tell me this is normal. That all ACs in the valley run 2 degrees higher than room temp. Doesn't sound logical to me.
Any thoughts. Is the AC installer pulling a fast one?
TIA
David
The house is approx 1400 sq ft & the unit is a 3 ton
The thermostat is a new as is the AC unit. They are both Ruud brand.
The thermostat is programmable and displays both the desired temp & "actual" temp. When the day's max temp out side were lest than 100 both the desired temp & "actual" temp were the same.
This morning at 10am both temps were the same 72 degrees & outside it was 96. At noon it was 102 outside & the set temp was 72 & the inside temp had risen to 74. All afternoon it kept going up
Regarding attic insulation, several contractors have all been up in the attic. All have said we have excellent insulation. Someone mentioned "30" which I take to be R30.
We just had 80% film installed on all windows. Some windows also have solar screens.
To GTB, from my understanding 108 is not an extremely hot day for June in the Phoenix.
Apparently the AC installer figured that a 3 ton unit was good for a 1400 sq ft home.
There is film on windows and excellent ceiling insulation.
Get the answers
|
Next page: Ac Installers
Bookmark/Share This Page:
Recommended Products
Ac Installer News
